Yamaha TG500 - Manual (Page 141)

129
3-3-06: SENSITIVITY
VOICE EDIT MODE / 3: Full Edit. 3-3: Filter
3-3-06: SENSITIVITY
These parameters determine how the filter envelope generator is affected by key-
board dynamics.
VCE Flt Sens <Type >
EG_shift — +45 0
Type (Velocity sensitivity type)
Range: EG_attack, EG_shift
Determines whether changes in key velocity (keyboard dynamics) affect the
attack level of the filter EG or its cutoff frequency. When set to “EG_attack”,
velocity affects filter EG attack level, and when set to “EG_shift”, velocity
affects the filter cutoff frequency.
Vel (Velocity sensitivity)
Range: -63 ... +63
Determines how the filter cutoff frequency changes in response to velocity
changes (e.g. keyboard dynamics).
Plus “+” settings produce higher cutoff frequencies in response to higher
velocity values — i.e. the harder a key is played, the higher the cutoff fre-
quency. The maximum setting of “+63” produces the maximum level variation
in response to velocity changes. Minus “–” settings produce the opposite effect:
lower cutoff in response to higher velocity. A setting of “+0” results in no
cutoff variation.
RateVel (Attack rate velocity sensitivity)
Range: -63 ... +63
Determines how key velocity (keyboard dynamics) affect the attack portion
of the filter EG envelope.
Plus (“+”) settings produce an increase in attack time in proportion to key
velocity, while minus (“–”) settings produce a decrease in attack time in pro-
portion to key velocity. The greater the value the greater the change in attack
time.
RateVel Vel Type
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-3: Filter -> [ENTER]
-> [PAGE] -> 3-3-06: Sensitivity -> [ENTER]