Wave, Utl wave waveform = 00(initwave) – Yamaha TG500 User Manual
Page 249
Advertising
237
UTILITY MODE / WAVE EDIT MODE / 5: Wave
WAVE
This function only appears if one or two SYEMB06 Memory Expansion Boards are
installed in the TG500 expansion memory slot (see page 282 for details on memory
expansion).
Specifies the number of the waveform to be edited using the WAVE EDIT func-
tions (accessed by pressing the [EDIT/COMPARE] key from this screen), and the
number of the waveform to which a sample loaded from card will be assigned.
5: WAVE
UTL WAVE
Waveform = 00(InitWave)
Waveform
Range: 00 … 63
The name of the selected waveform appears between parentheses on the
upper display line.
[UTILITY/SELECT] -> 5: Wave -> [ENTER]
Advertising