Yamaha TG500 - Manual (Page 184)

172
1-3: EXCHANGE
D R U M V O I C E E D I T M O D E / 1 : K e y P a r a m e t e r
1 - 3 : E X C H A N G E
DRM Key Exchange
(Clave ) C 4 †¥ C 1
This function makes it simple to re-arrange you drum key layout by directly
exchanging the data between any two specifed drum keys.
DRM Key Exchange Sure?
(Clave ) C 4 †¥ C 1
Use the [
,] and [.] keys to position the cursor, and the [-1/NO] and
[+1/YES] keys to select the drum keys to be exchanged (C1 … C5). The keyboard
connected to the TG500 can also be used to directly enter the keys after moving the
cursor to the appropriate parameter.
Press [ENTER] to begin the layer exchange procedure. The following confirmation
display will appear:
Press [+1/YES] again to confirm that you want to go ahead with the key data
exchange operation, or press [-1/NO] to cancel.
“Completed!” will appear briefly on the display when the data has been ex-
changed.
[PLAY/MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Key Parameter -> [ENTER] -> [PAGE]
-> 1-2: Exchange -> [ENTER]