ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 111)

Chapter 7 Wireless Security Configuration
ZyXEL NWA-3500 User’s Guide
111
Figure 60 Security: 802.1x Only
The following table describes the labels in this screen.
7.9.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
Select 802.1x Static 64 or 802.1x Static 128 in the Security Mode field to display the
following screen.
Table 28 Security: 802.1x Only
LABEL DESCRIPTION
Name Type a name to identify this security profile.
Security Mode Choose 802.1x Only in this field.
ReAuthentication
Timer
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes). Alternatively, enter “0” to turn reauthentication off.
Note: If wireless station authentication is done using a
RADIUS server, the reauthentication timer on the
RADIUS server has priority.
Idle Timeout The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.