ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 62)

Chapter 4 Tutorial
ZyXEL NWA-3500 User’s Guide
62
• Select WPA-PSK in the Security Mode field. WPA-PSK provides strong security that is
supported by most wireless clients. Even though your Guest_SSID clients do not have
access to sensitive information on the network, you should not leave the network without
security. An attacker could still cause damage to the network or intercept unsecured
communications.
• Enter the PSK you want to use in your network in the Pre Shared Key field. In this
example, the PSK is “ThisismyGuestWPApre-sharedkey”.
• Click Apply. The WIRELESS > Security screen displays. Ensure that the Profile Name
for entry 3 displays “Guest_Security” and that the Security Mode is WPA-PSK.
Figure 24 Tutorial: Guest Security: Updated
4.2.3.2 Set up Layer 2 Isolation
Configure layer 2 isolation to control the specific devices you want the users on your guest
network to access. Click WIRELESS > Layer-2 Isolation. The following screen appears.
Figure 25 Tutorial: Layer 2 Isolation
The Guest_SSID network uses the l2isolation01 profile by default, so select its entry and click
Edit. The following screen displays.