ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 243)

ZyXEL NWA-3500 User’s Guide
243
C
H A P T E R
25
System Maintenance and
Information
This chapter leads you through SMT menus 24.8 and 24.10.
25.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 –
System Maintenance. A list of valid commands can be found by typing help or ? at the
command prompt. Type “exit” to return to the SMT main menu when finished.
1
Use of undocumented commands or misconfiguration can damage the unit and
possibly render it unusable.
Figure 164 Menu 24 System Maintenance
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: