Figure 38 tutorial: ssid edit, Figure 39 tutorial: layer-2 isolation edit – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 74
Chapter 4 Tutorial
ZyXEL NWA-3500 User’s Guide
74
Figure 38 Tutorial: SSID Edit
Select l2Isolation03 in the L2 Isolation field, and select macfilter03 in the MAC
Filtering field. Click Apply.
3 Click the Layer-2 Isolation tab. When the Layer-2 Isolation screen appears, select
L2Isolation03’s entry and click Edit. The following screen displays.
Figure 39 Tutorial: Layer-2 Isolation Edit
Enter the network router’s MAC Address and add a Description (“NET_ROUTER” in
this case) in Set 1’s entry.
Enter server 1’s MAC Address and add a Description (“SERVER_1” in this case) in
Set 2’s entry.
Change the Profile Name to “L-2-ISO_SERVER_1” and click Apply. You have
restricted users on the SERVER_1 network to access only the devices with the MAC
addresses you entered.
4 Click the MAC Filter tab. When the MAC Filter screen appears, select macfilter03’s
entry and click Edit.
Enter the MAC address of the device Alice uses to connect to the network in Set 1’s
MAC Address field and enter her name in the Description field, as shown in the
following figure. Change the Profile Name to “MacFilter_SERVER_1”. Select Allow
Association from the Filter Action field and click Apply.