ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 231)

ZyXEL NWA-3500 User’s Guide
231
C
H A P T E R
23
System Information and
Diagnosis
This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and
upgrades for the system software. This chapter describes how to use these tools in detail.
Type “24” in the main menu and press [ENTER] to open Menu 24 – System Maintenance, as
shown in the following figure.
Figure 154 Menu 24 System Maintenance
23.1 System Status
The first selection, System Status gives you information on the status and statistics of the
ports, as shown next. System Status is a tool that can be used to monitor your ZyXEL Device.
Specifically, it gives you information on your Ethernet and Wireless LAN status, and the
number of packets sent and received.
To get to System Status, type “24” to go to Menu 24 – System Maintenance. From this menu,
type “1”. There are two commands in Menu 24.1 – System Maintenance – Status. Entering 9
resets the counters; pressing [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 – System Maintenance –
Status which are read-only and meant for diagnostic purposes.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: