2 configuring log settings, Figure 106 log settings – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 182
Chapter 15 Log Screens
ZyXEL NWA-3500 User’s Guide
182
15.2 Configuring Log Settings
To change your ZyXEL Device’s log settings, click LOGS > Log Settings. The screen
appears as shown.
Use the Log Settings screen to configure to where and when the ZyXEL Device is to send the
logs and which logs and/or immediate alerts it is to send.
An alert is a type of log that warrants more serious attention. Some categories such as System
Errors consist of both logs and alerts. You may differentiate them by their color in the View
Log screen. Alerts are displayed in red and logs are displayed in black.
Figure 106 Log Settings
Notes
This field displays additional information about the log entry.
Email Log Now
Click Email Log Now to send the log screen to the e-mail address specified in
the Log Settings page.
Refresh
Click Refresh to renew the log screen.
Clear Log
Click Clear Log to clear all the logs.
Table 63 View Log
LABEL
DESCRIPTION