5 remote management limitations, 4 system timeout – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual

Page 249

Advertising
background image

Chapter 25 System Maintenance and Information

ZyXEL NWA-3500 User’s Guide

249

25.3.5 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1 You have disabled that service in menu 24.11.
2 The IP address in the Secured Client IP field (menu 24.11) does not match the client IP

address. If it does not match, the ZyXEL Device will disconnect the session
immediately.

3 There is already another remote management session of the same type (Telnet, FTP or

Web) running. You may only have one remote management session of the same type
running at one time.

4 There is a web remote management session running with a Telnet session. A Telnet

session will be disconnected if you begin a web session; it will not begin if there already
is a web session.

25.4 System Timeout

There is a system timeout of five minutes (300 seconds) for Telnet/web/FTP connections. Your
ZyXEL Device will automatically log you out if you do nothing in this timeout period, except
when it is continuously updating the status in menu 24.1 or when sys stdio has been

changed on the command line.

Advertising