1 change the operating mode, Figure 13 tutorial: example mbssid setup, Table 3 tutorial: example information – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 55
Chapter 4 Tutorial
ZyXEL NWA-3500 User’s Guide
55
Figure 13 Tutorial: Example MBSSID Setup
The standard network (SSID04) has access to all resources. The VoIP network (VoIP_SSID)
has access to all resources and a high Quality of Service (QoS) setting (see
for information on QoS). The guest network (Guest_SSID) has access to the Internet and
the network printer only, and a low QoS setting.
To configure these settings, you need to know the MAC (Media Access Control) addresses of
the devices you want to allow users of the guest network to access. The following table shows
the addresses used in this example.
4.2.1 Change the Operating Mode
Log in to the ZyXEL Device (see
). Click WIRELESS > Wireless. The
Wireless screen appears. In this example, the ZyXEL Device is using WLAN adaptor 1 in
Access Point operating mode, and is currently set to use the SSID04 profile.
Table 3 Tutorial: Example Information
Network router (A) MAC address
00:AA:00:AA:00:AA
Network printer (B) MAC address
AA:00:AA:00:AA:00