ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 227)

ZyXEL NWA-3500 User’s Guide
227
C
H A P T E R
21
SNMP Configuration
This chapter explains SNMP Configuration menu 22. See the web configurator chapter on
SNMP for background information.
21.1 SNMP Configuration
To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP
Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP
terminology for password.
Figure 152 Menu 22 SNMP Configuration
The following table describes the SNMP configuration parameters.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 83 Menu 22 SNMP Configuration
FIELD DESCRIPTION
SNMP:
Get Community Type the Get Community, which is the password for the incoming Get- and
GetNext requests from the management station.
Set Community Type the Set Community, which is the password for incoming Set requests from
the management station.
Trusted Host If you enter a trusted host, your ZyXEL Device will only respond to SNMP
messages from this address. A blank (default) field means your ZyXEL Device will
respond to all SNMP messages it receives, regardless of source.
Trap:
Community Type the trap community, which is the password sent with each trap to the SNMP
manager.