Changhong MRF-410 - Manual (Page 10)

10
EN
• When installing the refrigerator next
to another refrigerator or a freezer,
ensure side clearance of at least 2
cm;
• Install the refrigerator on a perfectly
even and firm surface. When align-
ing the refrigerator, its doors must
be closed.
• Use a level with a glass scale and a
bubble to make sure that the refrig-
erator is in a level position; all four
legs must stand firmly on the floor.
• If the refrigerator needs adjustment,
carefully tilt it and turn the front ad-
justable leg until the refrigerator is in
the required position.
• Alignment of the refrigerator pre-
vents its displacement, vibration
and other issues.
• Do not replace the original aligning
legs with other legs.
• Wait at least 2 hours before plug-
ging the refrigerator in; this will help
ensure fault-free operation.
• After the product has been installed,
make sure that it is not standing on
a power cable;
• Alteration of device parts is prohib-
ited. Avoid damaging the capillary
tube visible in the rear wall recess
for the compressor. The capillary
tube must not be bent, unbent or
twisted. Damage to the refrigera-
tor’s capillary tube will void the war-
ranty!
• To ensure unhampered opening of
the refrigerator’s door, there must
be 5 cm clearance between the
side of the refrigerator (from the
door hinge) and the wall of the room
where it has been installed.