Changhong MRF-410 - Manual (Page 20)

20
EN
Button 3, OK
• If a symbol or number is flashing,
press 3 to confirm the number; the
display will stop flashing and the set
function/value will be displayed.
• If a number is flashing, but you do
not take any actions or press button
1, the number will stop flashing in
5 seconds and the set temperature
will remain unchanged.
• If a symbol is flashing (for example,
2 or 3), but you take no further ac-
tion and do not press button 1, the
symbol will stop flashing in 5 sec-
onds and the function will not be set.
Button 4, QUICK FREEZE
• If no other settings are being en-
tered and the quick freeze function
is not activated, the quick freeze
mode can be activated by pressing
button 4. If the Quick Freeze mode
is already activated, pressing this
button will deactivate it.
• If other parameters are being set
(there are symbols or numbers
flashing on the display), pressing
this button will have no effect.
Button 5, AUTO
• If no other parameters are being set
and AUTO function is not activated,
pressing 5 will activate this function.
If this function is already activated,
pressing this button will deactivate
it.
• If other parameters are being set
(there are symbols or numbers
flashing), pressing this button will
have no effect.
QUICK FREEZE
The Quick Freeze function is automati-
cally deactivated after 26 hours. In the
Smart mode, the Quick Freeze func-
tion is deactivated.
• After deactivation of the Quick
Freeze function, the freezer tem-
perature will return to the previ-
ously set value.
1 4
Number
Nummer
Номер
Номер
Simbol
Zeichen
Знак
Знак
2
3
?
5