Changhong MRF-410 - Manual (Page 8)

8
EN
GROUNDING
• The power cord has a three-pronged
grounded plug for your personal
safety. It must be connected to a
grounding type wall receptacle, in
accordance with the legislation gov-
erning electric installations in your
country, as well as any local regu-
lations. Do not remove the ground-
ing prong, do not use a two pronged
adaptor, and never make a connec-
tion to the schematic. Use the cord
supplied with the equipment (do not
change it). Ifthe cord is damaged,
it must be immediately replaced by
specialized personnel.
Attention! Earthing must be
provided for your safety. If there
is no earthing, contact a qualified
technician.
!
INSTALLATION
• Remove the package and self-
adhesive tape used to protect the
doors and accessories; use soap to
remove any glue residue;
• Keep expanded polystyrene pack-
ing elements; these elements, foil
and self-adhesive tape will be used
to pack the refrigerator for protec-
tion during transportation;
• Wash the refrigerator’s interior and
accessories with warm water and
dishwashing liquid and then wipe
dry;
• Place the refrigerator in a dry ven-
tilated place protected from direct
sunlight and at a sufficient distance
from heat sources such as a kitchen
stove, radiator, etc. If this condi-
tion cannot be met, use a suitable
insulating plate when installing the
refrigerator near heat sources or
provide the following clearance from
heat sources: from the kitchen stove
– 3 cm; from oil or coal stoves – 30
cm;