Changhong MRF-410 - Manual (Page 24)

24
EN
Attention! During the freezing
process , the freezer compartment
setting can be set and control at
any time.
!
Turning off the display backlight
• As soon as the power is switched
on, the display is fully illuminated. If
no action is taken, the display back-
light will automatically go out after 3
minutes.
Temperature setting
• In order to set the temperature inside
the refrigerator, press 1, choose set
temperature in the refrigerator
and use 3 to set the required tem-
perature. The temperature is set in
the range of 8 °С ~ 2 °С.
• In order to set the temperature in
the freezer, press 1, choose “set
temperature in the freezer” and use
3 to set the required temperature.
The temperature is set in the range
of –16 °С ~ –24 °С.
Audio signals
• Open door Signal: If the door is left
open for more than 3 minutes, the
warning device sends an alarm re-
minding you to close the door. The
alarm will go out when the door is
closed. If the door is left open, an
alarm sounds; pressing any button
will deactivate the alarm for 3 min-
utes. If the door remains open for
more than 10 minutes, the interior
lighting automatically goes out.
• High temperature signal: If during
the refrigerator’s operation, the tem-
perature inside the freezer exceeds
-10 °С, the freezer’s temperature
display will flash. Pressing any but-
ton will show the initial temperature
on the display. Press the button
once again or wait 5 seconds; the
display will return to the normal dis-
play mode.
1
Number
Nummer
Номер
Номер
Simbol
Zeichen
Знак
Знак
2
3