Activeforever Invacare SOLO2 Portable Oxygen Concentrator - Manual (Page 20)

SECTION 6—OPERATING INSTRUCTIONS
Invacare SOLO
2
™ 20 Part No 1156872
2. To operate from external power (AC or DC) please follow the steps
below:
A. Turn off the transportable oxygen concentrator.
B. Connect the external power supply (DC power cable or AC power
adapter) to the transportable oxygen concentrator.
C. Perform one of the following:
• Plug the other end of the AC power adapter into a wall outlet.
• Plug the other end of the DC power cable into the auto
accessory outlet and start the engine.
D. Turn the transportable oxygen concentrator on.
FIGURE 6.1 Powering the Transportable Oxygen Concentrator
DETAIL “A” - BATTERY MODULE
DETAIL “B” - DC POWER CABLE DETAIL “C” - AC POWER
ADAPTER
Transportable
Oxygen
Concentrator
Battery Module
(Removed)
Transportable
Oxygen
Concentrator
DC Power
Cable
Connect to DC
Power Source
Transportable Oxygen
Concentrator
AC Power Adapter
Connect to AC
Power Source
Battery
Module
(Installed)
Battery
Connections