AASTRA 7446ip (5446ip) for MD Evolution User Guide EN - Manual (Page 80)

Dialog 5446 IP Premium
Note: Austria: *91, Italy: *91#, Norway: #68, North America: *91,
Denmark, Sweden: *29#
SIP Phones
1. Dial 68 to proceed to standby within your primary group.
Note: Austria: *91, Italy: *91#, Norway: #68, North America: *91,
Denmark, Sweden: *29#
2. Tap the Call button.
If your extension was active within your primary group, it will now be on
standby. On the other hand, if your extension was on standby, it will now be
active within your primary group.
In relation to your secondary groups, your extension’s active or inactive status
is changed for all of them at the same time.
In either case the service acceptance tone is played.
Note: The prefix for accessing the standby service within secondary groups
differs from one facility to another.
You may place your extension on standby at any time, even if you are
the last active member of a group. Your status is managed completely
independently from the opening and closing of traffic for a specific
group, which is the sole responsibility of the hunt group supervisor.
12.4 Hunt Group Opening / Closing
You may be designated as a supervisor for one or several hunt groups,
regardless of whether or not you are a member of it (them). This is established
by a right that is assigned specifically to you by your system administrator.
In relation to this (these) hunt group(s) for which you are in charge, it is your
responsibility to open and close traffic for each one, according to its members’
business hours.
To open or close traffic to a hunt group, from an idle extension, do the following:
H.323 Phones
1. Dial the prefix to open/close hunt groups.
This varies from one facility to another.
2. Dial the internal number for the involved hunt group.
The service acceptance tone is played.
SIP Phones
74 7/1553-DBC 446 01 Uen B4 2008-09-16