Ohaus CD-33 Indicator - Manual (Page 21)

21
CD Indicators
3.6 RS232
The RS232 menu provides communication parameters which can be set to accommodate external printers or comput-
ers. It contains four submenus: Baud rate, Parity, Data and Lock. See descriptions below.
Baud Rate
This submenu is used to select the desired baud rate. There are six available baud rates to choose from: 300, 600,
1200, 2400, 4800 and 9600. The default setting is 2400.
Parity
Parity can be set to none,Odd, Even, 0, or 1. The default setting is None.
Data
Can be set to 7 or 8. Default is 7.
Stop
Stop bits can be set to 1 or 2. Default is 2.
Lock
Lock ON/OFF can only be changed when the hardware Lock Switch is set disabled (jumper on). A menu is locked
when the menu lock is set ON and the Lock Switch is enabled (jumper off). Lock when selected and turned on, locks
all of the entries made under the RS232 menu. In the locked condition, items may be looked at but not changed in the
menu. When set off, entries may be changed. OFF is the default setting.
Procedure
• Press the Setup button, SCALE is displayed.
• Press or button until RS232 is displayed.
• Press Enter button.
• Press or button until either BAUD, PARITY,
DATA, STOP, LOCK or EXIT is displayed.
• Press Enter button to save setting.
• Press or button and select the desired
menu setting.
• Press Enter button.
• Press or button to continue or EXIT.
• Press Enter button to save setting.