Ohaus CD-33 Indicator - Manual (Page 8)

8
CD Indicators
2. INSTALLATION
2.1 Unpacking and Checking
Open the package and remove the instrument and the accessories. Check the completeness of the delivery. The
following accessories are part of the standard equipment of your new Indicator.
• Remove packing material from the instrument.
• Check the instrument for transport damage. Immediately inform your Ohaus dealer if you have complaints or
parts are missing. Your Indicator package should contain:
• Indicator CD-31 or CD-33
• AC Adapter, 9 V dc, 500 ma output
• Instruction Manual
• Warranty card
• Capacity label
• Plain screwdriver
• Lead & wire calibration seal
• Cover plate and (2) screws
• Store all parts of the packaging. This packaging guarantees the best possible protection for the transport of your
instrument.
1. GETTING TO KNOW YOUR INDICATOR
1.1 Introduction
Thank you for deciding to purchase a CD-31/CD-33 Indicator from Ohaus. It offers a high level of operating conve-
nience and useful functions to make accurate measurements. A unique LCD panel has a large 7 digit, 7 segment
display which indicates the weight value of an item being measured and a 7 digit British Flag display (14 segments)
which spells out items selected in the submenus. In addition, the display contains English text to indicate the status
of the scale. Arrow indicators in the display provide a prompt as to what panel buttons are to be pressed to initiate a
change. The maximum capacity which can be displayed on the Indicator is 199,999 pounds or kilograms. The
Indicator can be table mounted, wall mounted, or tower mounted.
The Indicator is designed to operate with a wide variety of Ohaus scale bases and other scale bases that contain up
to 4-350 ohm load cells.
Behind your instrument stands OHAUS, a leading manufacturer of precision Indicators, Scales and Balances. An
Aftermarket Department with trained instrument technicians is dedicated to provide you with the fastest service
possible in the event your instrument requires servicing. OHAUS also has a Customer Service Department to answer
any inquiries regarding applications and accessories.
To ensure you make full use of the possibilities offered by your CD-31/CD-33 Indicator, please read the manual
completely before installation and operation.
2.2 Selecting the Location
The Indicator should be used in an environment which is free from corrosives, vibration, and temperature or humidity
extremes. These factors will affect displayed weight readings. Scale bases used with the Indicator should be located
on a stable level surface and kept away from vibrating sources such as large machinery. Maximum accuracy will be
achieved when the area is clean and vibration free.