Ohaus CD-33 Indicator - Manual (Page 23)

23
CD Indicators
3.8 Mode
The Mode submenu permits the selection of 6 modes which can be turned ON or OFF. These modes are: Weigh,
Percent, Count, Animal, Checkweigh and Lock. Weigh is turned ON and all others have a default setting of OFF.
When any of the modes are turned ON, they can be selected for operation from the Mode button.
Procedure
• Press the Setup button, SCALE is displayed.
• Press or button until MODE is displayed.
• Press Enter button.
• Press or button until either WEIGH, PER-
CENT, COUNT, ANIMAL, CHECKWEIGH, LOCK or
EXIT is displayed.
• Press Enter button.
• Press or button and select either ON or
OFF.
• Press Enter button to save setting.
• Press or button to continue or EXIT.
• Press Enter button to save setting.
Weigh
The Weigh submenu is always set to ON as a default.
Percent
Percent weighing permits you to place a reference load on the scale base platform, then view other loads as a percent-
age of the reference. Selection is made using the Mode button. The default setting is OFF.
Count
Counting is used when counting quantities of parts. Selection is made using the Mode button. The default setting is
OFF.
Animal
Animal weighing provides special settings to accommodate animal movements. Selection is made using the Mode
button. The default setting is OFF.
Checkweigh
Checkweigh mode permits you to weigh an item, set parameters such as minimum weight and over weight.
Subsquent items can be weighed against the criteria set in the Indicator. The parameters are set when in the Mode
operation and set to Checkweigh. The default setting is OFF.
Lock
Lock ON/OFF can only be changed when the hardware Lock Switch is disabled (jumper on). A menu is locked when
the menu lock is set ON and the Lock Switch is enabled (jumper off). Lock when selected and turned on, locks all of
the entries made under the Mode menu. In the locked condition, items may be looked at but not changed in the menu.
When set off, entries may be changed. OFF is the default setting.