Ohaus CD-33 Indicator - Manual (Page 42)

42
CD Indicators
Command Command Command Command Command
Character Character Character Character Character Description Description Description Description Description
1=percent
2=parts counting
3=animal weighing
4= checkweigh
xAW xAW xAW xAW xAW Set Animal Level to "x", where x= 0 to 3.
0= minimum filtering
1=
2=
3= maximum filtering
xE xE xE xE xE Turn Auto restart in Animal mode on or off.
Where x=0 is off and x=1 is on.
xT xT xT xT xT Set tare weight. Uses real number "x" as current tare weight. Weight must be entered in
Calibration Units.
ID ID ID ID ID Print Current User ID String.
xID xID xID xID xID Program User ID String, 1-8 characters.
AC AC AC AC AC Abort Calibration.
xUC xUC xUC xUC xUC Start User Calibration. Uses integer number "x" as calibration weight.
LE LE LE LE LE Show last error code. Response: "Err: x.x".
xS xS xS xS xS Turn Print Stable Only on or off.
Where x=0 is off and x=1 is on.
TIME TIME TIME TIME TIME Print current time. Note, a "?" will follow if time has not been set.
mm/dd/yy mm/dd/yy mm/dd/yy mm/dd/yy mm/dd/yy Set date command and remove invalid date indicator.
SETDATE SETDATE SETDATE SETDATE SETDATE
hh:mm:ss
hh:mm:ss hh:mm:ss hh:mm:ss hh:mm:ss Set time command and remove invalid time indicator. Time must be entered in 24 hr. format
SETTIME SETTIME SETTIME SETTIME SETTIME
DATE
DATE DATE DATE DATE Print current date. Note, a "?" will follow if date has not been set.
SW SW SW SW SW Shows Lockswitch status.
Z Z Z Z Z Same effect as pressing ">0<" Key.
NG NG NG NG NG Same effect as pressing the "G/N/T" Key. Cycles through Net, Gross, and tare displays if
possible.
EscM EscM EscM EscM EscM To print out a list of the scale selections.
E E E E E Will start animal cycle when in animal weighing mode.
RS232 COMMAND TABLE
4.7 Printing Data (Cont.)
4.7.2 Output Formats (Cont.)