Ohaus CW-11 Indicator - Manual (Page 20)

17
CW-11 Indicator
LCD BACK LIGHT
Press G/N/T/MENU button, bLAutOis displayed. You
can select to have the LCD backlight either on
contiuously, off or in an automatic mode which
turns off the display in 5 seconds.
Press PRINT/UNITS button, and either select ON, OFF
or Auto. Auto is the default setting.
EP
This is service function and is not a user operated
command. OFF is the default setting.
Not available w/LFT ON.
SAVE
Press G/N/T/MENU button to end this block, SAVE is
displayed. All settings are retained.
Press G/N/T/MENU button, setting are saved and
PRINT is displayed which is the next menu or press
PRINT/UNITS button to go back to Setup menu
without saving.
NOTE:(If initial setup, go to the next paragraph. To
exit from the Setup, press PRINT/UNITS button to
skip to PRINT then to LOCKSW, then QUIT. Press
G/N/T/MENU button to go back to the weighing
mode).
2.8 Initial Setup (Cont.)
2.8.5 Readout Menu (Cont.)