Ohaus CW-11 Indicator - Manual (Page 6)

3
CW-11 Indicator
C W
OVERVIEW OF CONTROLS AND INDICATOR FUNCTIONS
No. Designation Function
1 Display LCD display, indicates weight, modes and setup information.
2 Center of Zero LCD indicator prompt, indicates center of zero when within +/- 0.25d.
3 Dynamic LCD indicator prompt, indicates that Indicator is in dynamic weighing mode.
4 ON/ZERO/OFF button Turns Indicator on or off. Secondary use, provides zero function.
5 Pcs LCD indicator prompt, indicates parts counting function.
6 Print/Units button Short press, prints data which is displayed on the Indicator.
Long press, changes unit of measure.
When in menus, each press advances horizontally through the menus.
Finalizes a menu selection.
7 Gross Brutto LCD indicator prompt, indicates gross weight.
8 G/N/T/Menu button Recalls Gross/Net/Tare. Long press allows entry into menus. When in
menus, advances through individual menu items.
9 Net LCD indicator prompt indicates net weight.
10 Tare button When pressed, enters tare value into memory.
11 Tare LCD indicator prompt indicates tare weight.
12 kg LCD indicator, when lit, indicates weight in kilograms.
g LCD indicator, when lit, indicates weight in grams.
13 lb LCD indicator, when lit, indicates weight in pounds.
oz LCD indicator, when lit, indicates weight in ounces.
14 * Stability indicator, when lit, indicates stable weight.
3
4
2
5 6 8 9
10
7
1
12
13
lb
kg
oz
BAT
* 14
11