VEGA VEGAMET 614V - Manual (Page 19)

VEGAMET 614V 19
Settings in the „Reduced menu“
Name measurement loop
TAG-
Name
T AG -
No. 1
TAG-
Name
T
A G -
No. 1
TAG-
Name
Ves.4
Hall
3
Ves.4
Hall3
%
27,8
6.1 Configuration of measurement
loop
Choose sensor type
By default, VEGAMET 614V is configured for
connection to a hydrostatic pressure trans-
mitter. If, for example, you use another sen-
sor, you have to carry out previously „Reset
TAG 1“ (in the menu item „Reset Now! OK?“
you confirm this with the [OK] key). Move to
the menu item „Sensor type Hydrostatic“,
there you choose with the [+] or [–] keys the
sensor type and confirm it with [OK].
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion
TAG-
Name
TAG -
No. 1
Sensor
type
Hydro-
static
Sensor
optimize
Meas.
value
indication TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion Add’l
func-
tions
Pass-
word
off
Langu-
age
Eng-
lish
TAG 1
to de-
fault Reset
TAG 1
Delete
TAG
1?
Reset
OK ?
Reset
Now !
OK ?
Pulse-Echo
Pulse-Radar
You can modify the measurement loop name
„TAG-No. 1“, if you want a more useful desig-
nation.
Two lines with six figures each are available.
To do this, move to the menu item „TAG name
…“.
Push [+] or [–] once. The first char-
acter of the measurement loop name,
in this example the letter T, flashes
(editing mode). Continue pushing the
[+] or [–] key, by doing this you scroll
through the alphabet, through the row of
numbers and through a list of characters.
When you have reached the re-
quested character, push [–>]. The
next character is activated and be-
gins flashing. Scroll again with [+]
and [–] to the requested character. With [–>]
you move to the next character.
If you have finished the last position
of the name and you have "written"
the name of the measurement loop in
this way, you have to push [OK] to
save the setting. If you quit the menu item
without saving, the name of the measurement
loop is again „TAG-No. 1“.
In the display of measured value and
in all other menu items in which the
measurement loop name is shown,
you will now find the new designation.
6 Settings in the „Reduced menu“
Sensor
type
Hydro-
static