VEGA VEGAMET 614V - Manual (Page 28)

28 VEGAMET 614V
If another VEGAMET has been selected, the
menu item „Input undefined" appears in
which you can set the input number of the
other VEGAMET (see illustration).
The sensor characteristics values are deliv-
ered by the connected sensor and cannot be
modified here. The sensor menu is delivered
by the connected sensor and enables con-
figuration of the sensor from VEGAMET.
7.3 Configuration of inputs
Settings in the „Extended menu“
DISBUS
MET 05
input 1
„local MET“
Input local MET:
Here you can call another VEGAMET (e.g.
Met 05) and thereby specify that the input
signal should not be taken from a directly
connected sensor, but from a VEGAMET
connected via DISBUS (e.g. VEGAMET
614V). The called VEGAMET number corre-
sponds to the DISBUS address of the instru-
ment (see chapter 4.1).
Input no. 1: VBUS input (measured value)
Input no. 2: VBUS input (measured temperature value)
Confi-
gura-
tion
Config
inputs
Input
no. 1
Input
from
local
Met
Serial
no.
xxxx
xxxx
Sensor
charac-
terist-
ics
Min.
meas.
range
0,00
Max.
meas.
range
5,00
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
MET02
MET03
MET04
….
Input
undef-
ined
Input 1
Input 2
Input 3
Param.
TAG-
No. 2
Input
no. 2
like input 1
Sensor
opti-
misation
For radar/ultrasonic sensors: see
MINICOM menu schematic in the
VEGASON/VEGAPULS operating instruc-
tion manual under chapter „Adjustment
with VEGAMET or MINICOM“.
Ser. No.
12345678
CONNECT
%
100
+ -
OK ESC
on
1 2
614 Ser. No.
12345678
CONNECT
%
100
+ -
OK ESC
on
1 2
614
TAG-
No. 1
%
35,9
Ein-
gang
Ein-
gang1