VEGA VEGASON 51K…53K - Manual (Page 50)

50 VEGASON 51K … 53K
Set-up
Continuation HART ® -menu plan – VEGASON 51K…53K
from 1.3.4
1.3.4.8
Available initialisation words: Available initialisation words: Available initialisation words: Available initialisation words: Available initialisation words:
..SOL Meas. condition solid
..LIQ Meas. condition liquid
..FED Delete false echo memory
..FEN04.58M False echo e.g. at 4.58 m create new
..FEN48.67FT False echo e.g. at 48.67 ft create new
..FEU03.68M Extend false echo memory:
add a new false echo to the false echo memory at 3.68 m
..FEU36.05FT add a new false echo to the false echo memory at 36.05 ft
Initialisation word
(enter at last)
newly entered and initialisa-
tion word to enquire with
ENTER and SEND
D D D D D
Note:
After the adjustment of the initialisation word, press
"ENTER“ and then "SEND“.
Confirm the message to change over to manual
operation with "OK“ and the message to switch over
to automatic operation again with "OK“.
Only then is the adjustment written in the sensor and
effective.
1.4.3.1
1.4.3.1.2
Low: Not selectable r (3,6 mA)
High: In case of failure current output
goes to < 21,5 mA
1.4.3.1.3
1.4.3.1.3.1
from
1.4.3. Warning:
Switch off
control!
Generic: SENSOR
Message
..SOL
..FEN04.58M
HELP DEL ESC ENTER
Generic: SENSOR
Analogue output
1 A01 13,467mA
2 A0 Alrm typ
3 Loop test
4 D/A trim
5 Scaled D/A trim
HELP SAVE HOME
Generic: SENSOR
Choose analogue output
level
1 4 mA
2 20 mA
3 Other
4 End
Abort Enter
Generic: SENSOR
Fld dev output is
fixed at 4.000 mA
ABORTOK
Generic: SENSOR
A0 Alrm typ
High
Exit