Toshiba Pocket PC e800 - Manual (Page 100)

User’s Manual 7-6
Getting Connected
4. In Name, enter a name for the connection, such as your company's
name. In Host name/IP, enter the VPN server name or IP address.
Next to VPN type, select the type of authentication to use with your
device: IPSec/L2TP or PPTP. If you aren't sure which option to choose,
ask your network administrator.
5. Select the type of authentication. If you select A pre-shared key, enter
the key provided by your network administrator.
6. Enter your user name, password, and domain name as provided by
your ISP or network administrator. If a domain name was not provided,
try the connection without entering a domain name.
7. You should not need to change any advanced settings. Instances where
you must change advanced settings include:
■ The server to which you are connecting does not use dynamically-
assigned addresses, and you need to enter your TCP/IP settings.
■ You need to change server DNS or WINS settings.
To change advanced settings, tap Advanced. Otherwise, tap Finish.
To edit proxy settings:
1. Tap , Settings, Connections tab.
2. To change proxy server settings, in My Work Network, tap Edit my
proxy server.
3. Select This network connects to the Internet and This network uses
a proxy server to connect to the Internet.
4. In the Proxy server box, enter the proxy server name.
5. To change such settings as port number or proxy server type, tap
Advanced and change desired settings.
End a Connection
To disconnect, do one of the following:
■ When connected via dial-up or VPN, tap the Connection icon, , on
your navigation bar, and then tap End.
■ When connected via cable or cradle, detach your device from the cable
or cradle.
■ When connected via Infrared, move the device away from the PC or
device.
■ When connected via a network (Ethernet) card, remove the card from
your device.
■ When connected via a wireless network, switch off the connection.
To change existing settings, in My Work Network, tap Manage existing
connections, VPN tab. Select the desired VPN connection, tap Edit, and
follow the instructions on the screen.