Toshiba Pocket PC e800 - Manual (Page 193)

User’s Manual 11-38
Optional Functions
The “zoom area” will be displayed on top of the already-existing projection
of the entire slide on the VGA screen.
After the rectangular zoom area exists on your screen, you can drag it to
any part of the screen you wish. It can also be converted to any of the other
pre-defined sizes by pressing your stylus on the LCD screen to open the
pop-up menu again, then selecting a different value from the VGA Zoom
Size submenu. The size of the existing area will then be changed
accordingly.
If you select Drag Select on the submenu, you will be able to drag your
stylus on the LCD screen and freely define any area for zooming. After the
desired area has been specified, you can drag it to any portion of the
screen. You can also resize it by dragging any of its corners. To specify the
zoom ratio for the projected zoom area, use the VGA Zoom Ratio
command.
VGA Zoom Ratio
The VGA Zoom Ratio command opens a submenu of pre-defined “zoom
ratio” options. When you invoke VGA Zoom mode by selecting it on the
pop-up menu, the current setting on the VGA Zoom Ratio submenu will be
activated.
Screen
The Screen submenu contains commands that allow you to pause a Slide
Show (Pause Auto Play), project a blank screen (Blank), undo the most
recent Ink stroke (Clear Last Pen), or erase all Ink strokes (Clear All Pen).
Pause Auto Play
If you have specified that you want slides to advance automatically after a
specified number of seconds (using the Set Up Show... command on the
Tools Menu or the Set Up Show icon on the Toolbar), you can select Pause
Auto Play during the playing of a slide show to pause the show. When
ready to continue the automatic progress of a slide show, tap Resume
Auto Play.
Blank
When you select Blank, your LCD screen will become completely black,
and the black screen will also be projected to your VGA screen. (After you
have selected Blank, the command name changes to Restore. Tap
Restore when you are ready to return to the slide that was previously
displayed.)
Using the Blank Option with Pen Mode:
When the Blank option is active and IA Presenter is in Pen mode, you can
write or draw digital Ink on the screen, and it will be output to the VGA
device. In effect, this allows you to project an “electronic blackboard” which
you might find useful when giving a presentation to an audience. Be aware
that any Ink strokes you draw on the Blank screen will be lost when you exit
Blank mode. They cannot be retained.