Initial setup, Inserting a cf ii card – Toshiba Pocket PC e800 User Manual
Page 32
User’s Manual
2-14
Basic Skills
Initial Setup
When using the Toshiba Pocket PC e800 for the first time, follow the initial
setup procedures below, after the battery has been charged.
1. Move the battery switch to the “supply” position. The Toshiba Pocket
PC e800 powers on automatically and the Welcome screen appears.
Tap the screen to start the following setup.
2. Execute touch screen correction.
When the align screen appears, tap the center of the cross target with
the stylus. The next target position changes upon tapping the target.
Five taps completes the positioning correction. The screen then
changes to the Stylus screen.
■
If a finger or any other object touches the screen during correction,
the correction will be cancelled. Repeat the correction procedure.
3. Read how to use the stylus.
■
Read and understand the stylus operation, and then tap NEXT.
4. Learn the pop-up menu operation.
■
Read the on-screen explanation and then follow the instructions.
Display the pop-up menu, and cut and paste the data according to
the screen instructions.
■
After you finish the paste operation, this stage is completed. Tap
NEXT.
5. Set the TIME ZONE.
■
When tapping the right
mark, the city and the time zone lists
appear. Tap the desired city and time zone.
■
When the setup is completed, tap NEXT.
6. To complete the initial setup.
■
When the Complete screen appears, the initial setup is completed.
■
After tapping the screen, you can use the Toshiba Pocket PC e800.
Inserting a CF II Card
1. Turn off the power.
2. Remove the dummy card.
For more information on stylus operation, See "How to Use the Stylus" on
When you tap the Complete screen, the Today screen appears. For more
information on the Today screen, see “