Toshiba Pocket PC e800 - Manual (Page 24)

User’s Manual 2-6
Basic Skills
How to Use the Stylus
The stylus is used for menu selection or data input on the touch-screen of
the Toshiba Pocket PC e800.
■ Tap: Touch the screen once with the stylus to open items and select
options.
■ Drag: Hold the stylus on the screen and drag it across to select text and
images. Drag in a list to select multiple items.
■ Tap and hold: Tap and hold the stylus on an item to see a list of actions
available for that item. On the pop-up menu that appears, tap the action
you want to perform.
About the Cursor Button
There are 2 modes for cursor button control,
■ 4-direction (upper, lower, right, or left)
■ 8-direction (oblique angles are added).
You can select the either of these two modes by tapping Settings, and then
Buttons. In either mode, you can move a cursor (selection display) on the
screen by pressing the upper, lower, right, or left part of the cursor button.
You can select a program to launch by pressing the center part of the
cursor button.
About the Scroller
About the TOSHIBA Scroller
You can move the cursor on the screen by moving the scroller up and
down, as well as launching a program by pressing the scroller.
You can also activate the previous window by holding down the scroller
until the current window closes. To enable or disable this function, select
the mode by tapping Settings, and then Buttons.
When you operate the touch screen of the Toshiba Pocket PC e800, use
the supplied stylus.
If the tip of the stylus is damaged, do not use it. If you operate the touch
screen with a damaged stylus or a ballpoint pen, the touch screen may be
damaged.
When the stylus is damaged, please purchase a new one.
The cursor movement is different depending on the screen. When the
cursor is at the right or the left side of the screen, it may not move.
The cursor movement is different depending on the screen. When the
cursor is at the right or the left side of the screen, it may not move.