Toshiba Pocket PC e800 - Manual (Page 215)

User’s Manual 12-17
Additional Information
Bluetooth Settings has not been started.
Cause The Bluetooth Settings program has not been started because a
Bluetooth device's power is not on in the Toshiba Pocket PC.
Solution Check the wireless switch to on position, and turn on the Blue-
tooth power from utility.
Program cannot be started because Bluetooth receiving program is
running.
Cause While the Bluetooth receiving program was running or the pop-up
menu was displayed as you were trying to receive a contact,
schedule, or task, you tried to send or receive another contact,
schedule, or task.
Solution You can only receive one contact, schedule, or task at a time
while the Bluetooth receiving program is running. Wait until you
have finished receiving the first object before sending or receiv-
ing another object.
Program cannot be started because Bluetooth sending program is
running.
Cause The Bluetooth receiving program was executed while the device
search screen was displayed in the Bluetooth sending program.
Solution Close the device search screen and try again.
Bluetooth Settings encountered an error and could not be executed.
Cause An error occurred in the initial settings of the Bluetooth Settings
program and the program could not be continued.
Solution Reset the Toshiba Pocket PC.
Processing interrupted due to insufficient memory.
Cause The memory capacity was insufficient because a buffer could not
be allocated.
Solution Shut down other operating programs or reset the Toshiba Pocket
PC.
Unable to retrieve device information.
Unable to send business card.
Unable to receive business card.
Unable to exchange business cards.
Unable to save receiving data.
Cause Invalid data has been received or the contact, schedule, or task
data cannot be saved for a reason other than an insufficient
memory.
Solution Confirm that the data sent by the connected remote device is in a
format supported by Toshiba Pocket PC.
There is no response from the partner device.
Cause The remote device (server) did not respond to a request to con-
nect or send/receive data within a set time.
Solution Confirm that the remote device is operating properly.
This cannot be sent because it contains invalid data.
Cause An error has occurred in the data conversion at the time the
object was sent.