Toshiba Pocket PC e800 - Manual (Page 192)

User’s Manual 11-37
Optional Functions
If Pen mode is active when you select Blank from the Screen submenu,
you will be able to draw or write Ink annotation on the projected black
screen. (The Screen submenu also lets you undo the most recent Ink
stroke, or erase all of the Ink strokes.)
VGA Pointer
This mode works only when IA Presenter is in VGA Slide Show view. After
you select the VGA Pointer command, your stylus movements on the LCD
screen will simulate a laser pen light on the VGA screen during
presentations. (To exit the VGA Pointer mode, select Trigger, Pen, or
VGA Zoom from the pop-up menu.)
VGA Zoom
This mode works only when IA Presenter is in VGA Slide Show view. After
you select the VGA Zoom mode, you will be able to specify a portion of the
screen which will be projected to the VGA screen, and also a zoom ratio for
that specific area. (To exit VGA Zoom mode, select Trigger, Pen, or VGA
Pointer from the pop-up menu.)
The message that appears on your screen when you invoke VGA Zoom
mode depends on the value that is currently selected on the VGA Zoom
Size submenu. The message will either tell you to tap-and-drag your stylus
to define an area yourself, or it will tell you to simply tap your stylus to
create a zoom area of pre-defined size. You can specify the zoom ratio
using the VGA Zoom Ratio submenu, accessed from the Slide Show pop-
up menu.
Pen Color
Tapping Pen Color opens a submenu of available colors to use for your Ink
annotation when in Pen mode. Select one of the available colors as the
new pen color. The Reset command resets the pen color to the default
White color.
Pen Width
Tapping Pen Width opens a submenu of available pen widths to use for
your Ink annotation when in Pen mode. Select a thickness settings as the
new pen width to be used for Ink strokes on the LCD screen (and projection
to VGA output, if desired). The 1 Unit option is the thinnest setting. Higher
values give you thicker widths.
VGA Zoom Size
The VGA Zoom Size command opens a submenu of “zoom area” options.
When you invoke VGA Zoom mode by selecting it on the pop-up menu, the
current setting on the VGA Zoom Size submenu will be activated.
The Quarter, Large, Medium, Small, and Tiny settings on the submenu
represent pre-defined areas. For example, if Quarter is selected, tapping
on your LCD screen will automatically produce a rectangular area which is
the size of one-quarter of your LCD screen (centered around the spot
where you tapped).