Toshiba Pocket PC e800 User Manual
Page 220
User’s Manual
12-22
Additional Information
Graphical User Interface (GUI) Bluetooth terms
Authentication Status
For remote devices that have performed Bluetooth authentication,
Pairable is displayed. For unauthenticated devices, Untrusted is
displayed.
Authentication
This is the process of confirming an authentication password to
allow a remote Bluetooth device to connect to Local Device. If the
authentication passwords on both devices do not match, the
connection is refused.
These are the following types of authentication:
Auto Connect
■
For a COM service, the program using COM is started and a
connection is established with the connection registered Bluetooth
device using the Serial Port Profile.
■
For a DUN service, Dial-up Networking is started and a connection
is established with the connection registered Bluetooth device using
the Dial-up Networking Profile.
COM Service Device
This is a device that provides SPP (Serial Port Profile) service.
Connectability Mode
This setting determines whether Local Device can be connected to
by other Bluetooth devices in response to a connection request.
Connected Device
This is a remote device that currently has a Bluetooth connection to
Local Device.
Connection Registration
This function is used to register an automatic connection.
Connection Status
This displays the current connection status (Connected,
Discovered, or Ghost) of Bluetooth devices.
Delete Ghost Device
This function is used to delete ghost devices from the device list.
Device Address
This is the unique address given to each Bluetooth SD Card.
Device Class
This indicates the type of Bluetooth device (desktop computer, cell
phone, etc.). A Bluetooth SD Card is categorized as a PDA.
■
Bluetooth
authentication
This is requested when trying to establish
a Bluetooth connection with a remote
device. You must enter the Bluetooth
passkey to connect.
■
OPP authentication This is requested when trying to connect
to a remote device to send all contacts by
OPP service. You must enter the OPP
password.
■
FTP authentication This is requested when trying to connect
to a remote device to start FTP service.
You must enter the FTP password.