Toshiba Pocket PC e800 - Manual (Page 181)

User’s Manual 11-26
Optional Functions
3. After the program is installed successfully, a message displays to inform
you that the application has been allocated to the program button 5
(recording button) automatically.
4. After installation, the system requires resetting.
Setting Up Voice Command
Once installed on your Toshiba Pocket PC e800, the Voice Command
Settings icon is displayed on Today screen. Tap this icon to launch the
Voice Command Settings application.
Global Command
1. Press the recording button and release immediately. The Voice
Command starts. Wait for a notification sound to start speaking.
2. Say one of the available voice commands. For example, to launch
Inbox, say “run Inbox”. When the command is successfully recognized,
a confirmation tone sounds, and the Inbox screen appears. If the
command is not recognized, a rejection tone sounds and the screen
does not change.
The Voice Command cannot “read” without the TOSHIBA Text to Speech
for Pocket PC installed. Installation of the TOSHIBA Text to Speech for
Pocket PC is highly recommended.
Once Voice Command is installed on your Toshiba Pocket PC e800, the
program button 5 (recording button at initial setting) is “assigned” and
recording with program button 5 is no longer available. If you want to use
program button 5 for recording while the Voice Command is assigned,
change the button assignment by tapping Start, Settings, and then
Buttons.
Tap to launch Voice Command Settings.