VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol Approval according to LPR radio standard - Manual (Page 2)

Contents
1 About this document
1.1 Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
1.2 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Symbolism used. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 For your safety
2.1 Authorised personnel . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Warning about incorrect use . . . . . . . . . . . . . . . . . . . 5
2.4 General safety instructions . . . . . . . . . . . . . . . . . . . . 5
2.5 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.6 NAMUR recommendations . . . . . . . . . . . . . . . . . . . . 6
2.7 Radio license for Europe. . . . . . . . . . . . . . . . . . . . . .
6
2.8 Radio license for USA/Canada . . . . . . . . . . . . . . . . . 7
2.9 Environmental instructions. . . . . . . . . . . . . . . . . . . . . 7
3 Product description
3.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2 Principle of operation . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 Packaging, transport and storage . . . . . . . . . . . . . . . 9
3.4 Accessories and replacement parts . . . . . . . . . . . . . . 10
4 Mounting
4.1 General instructions . . . . . . . . . . . . . . . . . . . . . . . . .
12
4.2 Mounting preparations - Horn antenna . . . . . . . . . . . . 12
4.3 Instructions for installation . . . . . . . . . . . . . . . . . . . . . 13
5 Connecting to power supply and bus system
5.1 Preparing the connection . . . . . . . . . . . . . . . . . . . . . 25
5.2 Connecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.3 Wiring plan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.4 Switch-on phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6 Set up the sensor with the indicating and adjustment module
6.1 Insert indicating and adjustment module. . . . . . . . . . . 29
6.2 Adjustment system . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.3 Parameter adjustment. . . . . . . . . . . . . . . . . . . . . . . . 31
6.4 Saving the parameter adjustment data . . . . . . . . . . . . 43
7 Setting up sensor and Modbus interface with PACTware
7.1 Connect the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
7.2 Parameter adjustment with PACTware . . . . . . . . . . . . 47
7.3 Saving the parameter adjustment data . . . . . . . . . . . . 48
8 Diagnosis, Asset Management and service
8.1 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
8.2 Measured value and event memory . . . . . . . . . . . . . . 49
2 VEGAPULS 62 • Approval according to LPR radio standard
Contents
41722
-EN
-120706