VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol Approval according to LPR radio standard User Manual
Page 46
Advertising
1
Fig. 26: Connecting the PC via USB to the Modbus electronics
1
USB cable to the PC
Connection of the PC to the RS 485 cable is carried out via a standard
interface adapter RS 485/USB. Parameter adjustment of the Modbus
electronics and the sensor electronics is possible via this connection.
Information:
For the parameter adjustment it is absolutely necessary to separate
the connection to the RTU.
RS485
USB
1
2
3
4
5
Fig. 27: Connection of the PC via the interface adapter to the RS 485 cable
1
Interface adapter RS 485/USB
2
USB cable to the PC
3
RS 485 cable
4
Sensor
5
Voltage supply
To the RS 485 cable
46
VEGAPULS
62 • Approval according to LPR radio standard
7 Setting up sensor and Modbus interface with PACTware
41722
-EN
-120706
Advertising