2 parameter adjustment with pactware – VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol Approval according to LPR radio standard User Manual
Page 47
7
.2 Parameter adjustment with PACTware
For parameter adjustment of the sensor via a Windows PC, the
configuration software PACTware and a suitable instrument driver
(DTM) according to FDT standard are required. The up-to-date
PACTware version as well as all available DTMs are compiled in a
DTM Collection. The DTMs can also be integrated into other frame
applications according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
the latest instrument software from our homepage. A description of the
update procedure is also available in the Internet.
Further setup steps are described in the operating instructions manual
"DTM C
ollection/PACTware" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descriptions
are available in the online help of PACTware and the DTMs.
Fig. 28: Example of a DTM view
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simple project configuration simplifies the adjustment considerably.
Saving/printing the project as well as import/export functions are also
part of the standard version.
Prerequisites
Standard/Full version
VEGAPULS
62 • Approval according to LPR radio standard
47
7 Setting up sensor and Modbus interface with PACTware
41722
-EN
-120706