Speedhut Ford GT Series Gauge - Manual (Page 2)

Single/multiple gauge installation steps
7. It is in this position that a single or multiple gauges can be replaced without taking the entire cluster out
of the car. You will likely need to remove a couple of nylon ties. Carefully note the position so you can
replace them with new ties.
8. Reverse this procedure to re-install instrument cluster back into dash. Remember to start with Speedom-
eter end first. Refer to the next section for more detailed instructions on re-installation if necessary.
Replace entire dash installation steps
9. To remove the panel from the car completely, you will need to clip the nylon zip ties and unplug each
gauge and display LCD panels from the main dash wiring harness. Be sure to note plug positions with
digital photos and/or marking paint to insure proper reassembly.