SENA Parani10 User Manual
Page 14
Advertising
14
<Fig. 3.1.1>
1-3. Select the number of the Serial port where
P01
is attached as in the Fig. 3.1.1 above.
1-4. Users need to select exactly same Baud/Parity/StopBit as real settings of attached
P01
.
9600/None/OneStopBit are default initial settings of all of Parani10s.
1-5. Press OK button when finished.
1-6. Open ‘Parani10_Manager->Start Configuration’on the upper left menu.
Parani10_Manager will bring the information on the attached
P01
as in Fig. 3.1.2
<Fig. 3.1.2>
Advertising