SENA Parani10 User Manual
Page 17
Advertising
17
2-5. Select the ‘
Connection(out)
’icon in the list control box and click the SEARCH button.
<Fig. 3.1.5>
2-6. Search
P01
from the sear ched list. Device Address of
P01
can be found on the back side of
P01
. If you find
P01
, press Cancel button to finish searching.
Make sure that Status LED of
P01
is still blinking in Green.
2-7. Please select
P01
from the searched list, then press CONNECT TO button.
2-8. You will get Successful Connection message.
<Fig. 3.1.6>
2-9. Now, Status LEDs on Both
P01
and
P02
are Green, which means they are connected.
2-10. Do not detach
P02
from your computer yet, we will go to next stage for Auto-connection
(Always-connection).
Advertising