SENA Parani10 User Manual
Page 20
Advertising
20
3-7.Select Device Setting icon in the list control box, and select MODE2 in Operation Mode and
apply.
<Fig. 3.1.9>
3-8. Now, detach
P01
from your computer.
3-9. Make sure that power to Both
P01
and
P02
are supplied.
With both,
P01
and
P02
, turn off both units using the Switch located on the side of its body.
Then, turn on both
P01
and
P02
almost at the same time.
Now, you will see Green Status LEDs on both units.
P01
and
P02
will be connected automatically, as long as the configuration for both units remains
unchanged.
Advertising