SENA Parani10 - Manual (Page 48)

48
* Customers may choose the usage of hardware flow control using Parani10_Manager
software.
If checked, Parani10 will use hardware flow control. If you do not want to use the function,
please uncheck and press Apply button.
C.2 Enabling/Disabling of Response Signals OK, CONNECT &
ERROR
Parani10 will respond to users on the current status, success & failure of connections, and error
mode. Both Parani10_Manager and Terminal Programs will receive related response signals
from Parani10.
In some cases, various equipment may regard these four response signals incorrectly and react
inappropriately. To avoid these possible errors, users may disable the response signals via
Parani10_Manager or AT commands at Terminal.