SENA Parani10 User Manual
Page 16
Advertising
16
1-8. Click the ‘
Connection(in)
’icon in list control box. Check both options and then click the
START button as shown in Fig. 3.1.4.
<Fig. 3.1.4>
1-9.
P01
now became ‘Discoverable/Connectable’so it can receive Bluetooth connection from
P02
. The STATUS LED of
P01
will blink green, twice every 3 seconds.
1-10. Detach
P01
from your computer, making sure its status LED is blinking green.
1-11. Close Parani10_Manager.
3.1.2 Let’s make
P02
search and connect to
P01
.
2-1. Attach
P02
to your PC, and start Parani10_Manager.
2-2. Select the number of the Serial port where
P02
.
2-3. Users need to select exactly same Baud/Parity/StopBit as the setting of attached
P02
.
9600/No/OneStopBit is default setting of all of Parani10s.
2-4. Press OK button.
Advertising