SENA Parani10 - Manual (Page 5)

5
AT+BTSCAN, n, to<cr> 35
AT+BTSCAN, BD_ADDR, to<cr> 36
AT+BTCANCEL<cr> 36
+++ 36
ATO<cr> 37
ATH<cr> 37
AT+BTSEC, Authentication, Encryption <cr> 37
AT+BTLAST?<cr> 37
AT+BTMODE, n<cr> 38
AT+BTNAME=”FriendlyName”<cr> 38
AT+BTKEY=”nnnn”<cr> 38
AT+BTINFO?<cr> 38
AT+BTLPM,n<cr> 39
AT+BTSD?<cr> 39
AT+BTCSD<cr> 39
AT+BTFP,n<cr> 39
AT+UARTCONFIG, baudrate, parity, stopbit,handshaking<cr> 40
Full AT commands set 40
Appendix B: Power Adaptor Specification................................................................................... 45
Appendix C: Troubleshooting...................................................................................................... 47
C.1 ON/OFF of Hardware Flow Control ........................................................................... 47
C.2 Enabling/Disabling of Response Signals OK, CONNECT & ERROR ....................... 48
C.3 For DCE connection................................................................................................... 49
C.4 Hardware Reset ......................................................................................................... 50
C.5 How to get Bluetooth CF cards connected to Parani10............................................. 51