SENA ProBee-ZE20S-HAOL - Manual (Page 22)

ProBee-ZE20S-HAxx User Guide Rev 1.9 22
To update firmware at local node, please follow the steps as below:
 Select a firmware file to update at the ‘Firmware Update’ section. The ‘Choose file in local PC’
button pops up the dialog where users can select the firmware file at local PC and the ‘Download
from web server’ button helps users download the firmware from web server.
 Click the ‘Update’ button at the ‘Device Update’ section to update the local node. The progress
rate is expressed at the ‘Local Device Update’ section and informative messages are shown at
‘Message’ section.
ProBee Manager also supports to update the firmware of remote nodes which join the network where
local node is. Because a sleepy end-device often enters sleep mode, to update remote node from a
sleepy end-device may not work.
To update firmware at remote node, please follow the steps as below:
 Select a firmware file.
 Click the ‘Search’ button, that scans the remote nodes joining the network where local node
belongs.
 Select the remote nodes to update in the remote nodes list.
 Click the ‘Update’ button at the ‘Remote Device Update’ section.