SENA ProBee-ZE20S-HAOL - Manual (Page 69)

ProBee-ZE20S-HAxx User Guide Rev 1.9 69
Response OK<CR> or ERROR<CR>
7.12.11 AT+IDENTIFY or AT+II
Description
Send ‘Identify’ command(Identify cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+IDENTIFY=<time><CR>
Response OK<CR> or ERROR<CR>
7.12.12 AT+IDENQUERY or AT+IQ
Description
Send ‘Identify Query’ command(Identify cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+IDENQUERY?<CR>
Response OK<CR> or ERROR<CR>
7.13 ProBeeHACI (Combined Interface) Profile Commands
7.13.1 AT+LOCK or AT+LK
Description
Send ‘Lock’ command(Door Lock cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+LOCK?<CR>
Response OK<CR> or ERROR<CR>
7.13.2 AT+UNLOCK or AT+UL
Description
Send ‘Unlock’ command(Door Lock cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+UNLOCK?<CR>
Response OK<CR> or ERROR<CR>
7.13.3 AT+ON
Description Send ‘On’ command(On/Off cluster) to destination node. (client-side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+ON?<CR>
Response OK<CR> or ERROR<CR>
7.13.4 AT+OFF or AT+OF
Description Send ‘On’ command(On/Off cluster) to destination node. (client-side command)