SENA ProBee-ZE20S-HAOL User Manual

Page 38

Advertising
background image

ProBee-ZE20S-HAxx User Guide Rev 1.9

38

In addition to the data communication via RS232 port, the RS232 port is capable of supplying power to

the development board. In order to use this feature, supply 5V power via the 9

th

pin of the DB9 socket.

5.3.3

USB Port

The development board also has a USB interface for UART communication. To use the USB port, the

HOST (SW2) switch should be set to USB and the software driver should be installed on the host

computer. The installation CD contains the software.

5.3.4

ZE20S GPIO Interface

The development board’s external GPIO interfaces as well as functional buttons such as factory default

reset switches are internally routed to the ZE20S GPIO pins. Table 5-2 summarizes the development

board’s interfaces and their corresponding GPIO pin numbers of the ZE20S.

Table 5-2 Development Board GPIO Interface Allocation

ZE20S

Pin Number

Name

Description

2

Factory Reset

Factory Default Reset Switch (SW8)

3

GPIO_0

Permit Joining Switch (SW9)

4

GPIO_1

UART DTR Output

5

GPIO_2

UART DSR Input

6

GPIO_3

UART CTS Input

7

GPIO_4

UART RTS Output

22

H/W Reset

Hardware Reset Switch

23

GPIO_16

Digital Output with LED(CR19) Display (Active High)

Digital Input with Button Switch (SW17, Active Low or Active High)

24

GPIO_15

Digital Output with LED(CR18) Display (Active High)

Digital Input with Button Switch (SW16, Active Low or Active High)

25

UART_RXD

UART Data Input

26

UART_TXD

UART Data Output

27

GPIO_14

Digital Output with LED(CR17) Display (Active High)

Digital Input with Button Switch (SW15, Active Low or Active High)

28

GPIO_13

Digital Output with LED(CR16) Display (Active High)

Digital Input with Button Switch (SW14, Active Low or Active High)

29

GPIO_12

Digital Output with LED(CR15) Display (Active High)

Digital Input with Button Switch (SW13, Active Low or Active High)

Analog Input with Light Sensor (U7)

30

GPIO_11

Digital Output with LED(CR14) Display (Active High)

Digital Input with Button Switch (SW12, Active Low or Active High)

Analog Input with Temperature Sensor (U6)

Advertising