SENA ProBee-ZE20S-HAOL - Manual (Page 43)

ProBee-ZE20S-HAxx User Guide Rev 1.9 43
The AT commands to turn off the LEDs of the ProBeeHADL End Device are as follows:
AT+CWRITE=0101,0000,00
OK
5.4.5 Turning on/off the ProBeeHAOL End-device LEDs from ProBeeHACI Coordinator
The AT commands to turn on the LEDs of the ProBeeHAOL end-device are as follows:
AT+ADDRDISCOVERY=0001950000000003
38A5
OK
AT+DEST=38A5,01
OK
AT+ON
OK
* Short address ‘38A5’ can be shown differently in your device.
The AT commands to turn off the LEDs of the ProBeeHAOL End Device are as follows:
AT+OFF
OK