GE Industrial Solutions AF-650 GP Drive Panel User Manual
Page 25
25
Ok
Downward arrow
E-05 = [7] External interlock
(Terminal 33 on drive (Digital I/P))
Auto-Tune
In the event that it is desired to “auto-tune” the drive to the connected motor, reference the following
instructions along with the AF 650 GP User’s Guide (DET – 607 or DET - 608):
With power applied to the panel –
1) Place the Test/Isolate/Normal, Hand/Off/Auto, and Drive/Off/Bypass selector switches in the “Normal”,
“Hand” or “Auto”, and “Drive” positions respectively.
2) For Full Auto tuning follow the instruction below
Quick Menu
Ok
Quick start
Ok
Once Up arrow
Ok
P-04 Auto Tuning
Ok
[1] Full Auto tune
Ok
Follow the Keypad direction
Note: If the panel has a load reactor, select “Reduced Auto tune”.
DEH40652
– Page 18 AN 11-2021 Rev 06, 12/16/2011